ServoXciter use with FASST Modules
Will the new ServoXciter work with the new FASST modules? I read in the RC Report that the version tested at that time would not but the problem would be fixed by the time the report was published? I have used the older version for some years now and look forward to the new model.

The current ServoXciter EF will read receiver pulses with an amplitude of 2.7V or higher. From my experience, the 2.4Ghz receivers put out a servo signal pulse which can be less than that amplitude and cause the ServoXciter EF not to recognize those pulses. The new hardware ServoXciter EF will use a different microprocessor port (TTL instead of Schmitt trigger) which will allow reading signals with amplitudes down to 1.1V. The ServoXciter Junior uses a TTL port for reading receiver pulses and works with the 2.4Ghz receivers. The new run of ServoXciter EF's is expected mid-July 2008.